Gidel Proc10M and Proc10N FPGA Accelerator Board | Stratix 10 MX and 10 NX | Proc1C carrier with 4x QSFP28 | FMC daughterboard | HBM2
Gidel’s Proc10M and Proc10N modules are designed to enable easy use and immediate accessibility to the powerful Intel Stratix 10 FPGA with HBM2 on-chip memory technology for both host and embedded systems.
The combination of the Proc10M/N’s large FPGA with 10X memory bandwidth and 1,600 Gb/s IO enables an unprecedented level of processing, system compactness and cost performance.
The Stratix10 MX and Stratix10 NX offer 10X more DRAM and eSRAM bandwidth than discrete DDR4 and QDR memories. The powerful Proc10M/N open the way to implement diverse innovations and high-end applications, including:
- Compact Broadcast and Image-Processing solutions enabling frame data grabbing data from multiple fast edge sensors and to perform image enhancements, processing, recognition, compression, and AI inferences.
- 5G and Radar combining high-speed digital I/O interfaces and edge computing such as FFTs to selectively reduce data and offload via PCIe Gen3 x16 or dedicated links.
- Ultra-fast switch for wireline traffic management up to 800G and single device solution for Deep Packet Inspection (DPI).
AI training leveraging 128GB density, HBM2s’ huge bandwidth, and the FPGA’s massive logic and DSP blocks.
High-end solutions can be produced within a remarkabley short time using the Proc10M or Proc10N module, its carrier boards, and Gidel’s powerful development suite, thus significantly accelerating time to market and improving ROI.
The Intel Stratix 10 MX / NX 2100 FPGA with its large HBM2 memory is ultra-compact at 95mm x 110mm has the following technical features:
- 2,073,000 LEs
- 7,920 18 x19 MAC
- 5-level memory scheme:
- Total Throughput > 50TB/s
- Total capacity > 128GB
- 72 Transceivers with bandwidth > 1,600 Gb/s (TX+RX):
- 48 x up to 26 Gb/s
- 16 x up to 16 Gb/s or PCIe Gen3x16
- 8 x up to 16Gb/s
- Option for 64 x up to 26 Gb/s
- 356 I/Os supporting:
- 16 - 3.3V IOs
- 90 - LVDS (1.6Ghz/line) or 180 GPIO
- 72 bit DDR4 interface or 156 GPIO
- PLLs with jitter cleaners(100fs)
- 6 dedicated input reference clocks
- 4 output reference clocks
- Supports up to 120W (10A @12V)
- Passive or active cooling
The Gidel Proc10M or Proc10N FPGA accelerator can be embodied as a customized carrier card, Gidel’s carrier card or half-length PCIe carrier board, or as an FPGA Mezzanine Card FMC daughter board. It is supported by the Gidel ProcWizard via a PCIe connection, and the developer environment, as follows:
- Gidel Developer’s Suite. The Gidel Developer’s suite comprises tools, IPs, and libraries for optimizing performance and reducing FPGA based system development time. Gidel’s IPs includes compression, data acquisition and real-time processing, multi-sensor/camera acquisition and synchronization, and a powerful debug IP. Gidel’s Developer’s Suite includes:
- Proc Dev Kit for automatic generation of Application Support Package (ASP). By mapping the board resources into the application needs, the user can focus on the primary tasks and achieve optimal performance in minimal time. In addition, the kit supports parallel access of multiple applications on a single FPGA thus expediting further the development and improving system reliability.
- ProcVision Kit enables different frame grabbing flavors and customization for both software and FPGA design code. Gidel offers a solution for grabbing and synchronizing between 100+ cameras. The kit also includes Gidel’s CamSim (camera simulator), and CertifEye for debug and verification of FPGA’s Image Processing IPs.
- TotalHistory debug IP for virtually infinite FPGA signal visibility.
Proc1C PCIe Carrier Board for the Proc10M and Proc10N
Gidel's Proc10M or Proc10N module, based on Intel's powerful Stratix l0 MX HBM FPGA, is designed for ultra-high-performance acquisition and real-time processing. The combination of HBM technology, which enables 10x more DRAM and eSRAM bandwidth, and 1600 Gb/s I/O bandwidth, offers tremendous application possibilities at unprecedented compactness and cost-performance.
Gidel offers a half-length PCIe carrier board for the Proc10M/N that can be used as an off-the-shelf solution, and as a reference for developing a custom carrier board to meet the target application's specifications. Gidel provides the board's design schematics and a design guide.
The PCIe Gen3 x16 Proc1C off-the-shelf carrier board has four QSFP28 ports, each capable of 100 Gb/s data transfer. There is a PHS connector for mounting daughterboards, and 19 x GPIO5 for peripheral system control. The PHS offers up to 128 Gb/s Rx/Tx allowing connection to 8x CoaXPress-12 cameras, for example.
The Gidel Proc1C carrier board uses only one of the three Proc10M/N connectors. The two additional connectors available on the Proc1C board can be used, per user design, for additional 800 Gb/s bandwidth, RDIMM interface, and many additional I/Os.
A daughterboard compliant with CoaXPress Version 2 CXP at 12.5 Gbps is available to function as an ultra-high-performance frame grabber and industrial machine vision and digital imaging processor card.
In addition, Gidel offers custom services for quick development of a carrier board according to your system requirements.
Product Data
