Engineering Design Team Legacy and Exotic Products

The EDT PCIe8 LX for PCI-Express has a Xilinx Virtex 5 LXT FPGA and 8 MB SRAM synchronous memory plus up to 2 GB 200-pin SODIMM DDR2 DRAM. The card has 4 independently programmable PLL clock generators, with frequencies from 1 to 45 MHz and error less than +/– 50 ppm. Two main boards can be combined with an ATA bridge.

The EDT PCI GS FPGA main board accelerator has a Xilinx Virtex II Pro XC2VP50 or XC2VP70, with 2 on-chip PowerPC processors and 8 MB SRAM synchronous memory plus up to 1 GB 200-pin SODIMM DDR2 DRAM. The card has 4 independently programmable PLL clock generators, with error less than +/– 50 ppm. Two main boards can be combined with an ATA bridge.

The EDT AMC FX5 high-speed DMA mainboard and data processing interface for AMC MicroTCA (uTCA), serves mezzanine boards such as the EDT DRX Dual IF signal receiver. Onboard is a Xilinx Virtex 5 XC5VFX70T or optional 100T, plus an on-chip PowerPC 440 CPU and 1 GB DDR2 DRAM SODIMM.

The EDT 3P is a three-port mezzanine board that mounts on a PCIe main board to provide three independent channels, each supporting either SFP or SFP+. Channel 0 supports up to 10 GbE (optical), while channels 1 and 2 support 1 GbE or OC3/12/48 (STM1/4/16) each, electrical or optical.

The EDT OC192 is a mezzanine board that pairs with an EDT PCI or PCI Express main board to support multiple standards. Transceivers are pluggable in two form factors: XFP for SONET OC192, SDH STM64, or 10 GbE; and an optional SFP for SONET OC3/12/48, SDH STM1/4/16, or 1 GbE.

The EDT OCMP (formerly OCM) is a mezzanine board that pairs with an EDT PCI or PCI Express main board to support electrical or optical 1 GbE, SONET OC3/12/48 (SDH STM1/4/16), or both. The OCMP has two VCXOs (volt-controlled crystal oscillators) that are programmable or settable to multiple frequencies.

The EDT OCM 2.7G is a mezzanine board that pairs with an AMC main board to support either optical or electrical ethernet 1 GbE or OC3/12/48 (STM1/4/16), or both. It comes as full-size or a mid-size AMC slots.

The EDT 3x3G is a mezzanine board that pairs with a PCI/e main board for high speed data transfer. The three channels each have a 3 Gb Xilinx RocketI/O transceiver and one SFP for either an electrical RJ45 1 GbE (1000 Base-T) Ethernet adapter or an optical LC.

The EDT HRC is a mezzanine board that pairs with a PCI/e main board for high speed data transfer. It supports both E4 or STS3 electrical signals and OC3/STM1 optical signals in numerous combinations.

The EDT MSDV is a mezzanine board that pairs with a PCI/e main board for high speed data transfer. Four BNC connectors allow up to four serial multi-rate digital video signals per DVB-ASI/SMPTE protocol.

The EDT 16TE3 is a mezzanine board that pairs with a PCI/e main board for high speed data transfer. It supports 16 channels of T3 or E3 interfaces and thoughputs large quantities of serial communications data for complex applications defined by the user.

The EDT Combo is a mezzanine board that pairs with a PCI/e main board for complex user-defined applications such as telecommunications network monitoring or telecommunications switching. The board pair transfers serial telecom or ECL data at high speed via a 66 MHz 32-bit PCI.

The EDT Combo 2 is a mezzanine board that pairs with a PCI/e main board for complex user-defined applications such as telecommunications network monitoring or telecommunications switching. The board pair transfers serial telecom or LVDS / RS-422 data at high speed via a 66 MHz 32-bit PCI.

The EDT Combo 3 is a mezzanine board that pairs with a PCI/e main board to support E3/T3, ECL, LVDS, or RS-422 signals and processes communications serial data for complex user-defined applications. Please contact us for availability.

The EDT SRXL mezzanine board pairs with EDT PCI/e main boards and receives simultaneous L-band signals between 925 and 2175 MHz and IF between 65 and 225 MHz. Each input is processed with a tunable quadrature down-converter.

The EDT SRXL2 is a mezzanine board with L-band inputs of 900 to 2250 MHz, IF inputs of 160, 140, 70, or 21.4 MHz, and a direct sampling path for IF inputs below 90 MHz. The L-band and IF can be input simultaneously.

The EDT DRX16 is a mezzanine board that pairs with a PCI Express main board to digitize two independent IF signals via 16-bit ADCs. Its Xilinx Virtex 6 LX FPGA (XC6VLX240T) has two identical ports for 2 – 300 MHz, with independent gain and sample rate settings.

The EDT SSE is a mezzanine board that pairs with a PCI Express main board for high-speed data transfer. It offers two input and one output channel ECL. The SSE samples the data on the rising edge and stores it in host memory via the main board.

The EDT XIOS 2U is intended for high intensity I/O applications. It has ten PCI Express slots with 45 W each, and discrete cooling. The server has one PICMG 1.3 CPU module with one Intel Xeon 5410 single or dual quad core processor, plus rear-panel I/O and two PCIe x8 slots.

The EDT EXP4 is a 1U expansion system with four PCIe Generation 2.0. expansion slots. Each of the 8 lanes has a 16-lane connector for up to four PCIe 2.0 boards so that 1-, 4-, 8-, or 16-lane boards can be installed, although only 8 lanes can be implemented.

The EDT WSU1 is a mass storage device with data transfer rates of 115 Gbs. Thus the SNAP1 realtime data acquisition unit storage, record and playback time can be increased to about 11 minutes. The unit pairs with a SNAP1 for a 100G 9.8 TB recorder to become the EDT WRAP100G signal recorder.

The EDT WRAP 10G is a powerful, flexible 3U computer system that records and plays back up to 10 Gbs of data acquired through an EDT board. It supports many data formats, including electrical and optical ethernet, LVDS, ECL, and OC3/12/48/192 (STM1/4/16/64).

The PCIe8 DVa CLS Camera Link simulator can be converted to a PCIe8 framegrabber with a firmware flash. Using an easy interface, a text-based configuration script defines the camera timing to be simulated. The board simulates image data so that applications can be debugged, or tested at system level when a camera is attached.

The EDT PCIe8g3 A5-40G supports PCI Express – PCIe, Gen3 - x8 and has a 40G QSFP+ and 40 GbE or OTU3. The board is available as half-height or full-height. The port links to the SERDES user-interface for serialization and deserialization, and clock recovery and its own 1 – 808 MHz programmable reference clock.

The EDT PCIe8g3 KU-10G supports PCI Express – PCIe, Gen3 - x8 and has a 40G QSFP+ and two 10G SFP/+ ports. Supported protocols are 1/10GbE, OC3/12/48/192 (STM1/4/16/64), or OTU1/2/2e/2f. Each port links to the SERDES user-interface for serialization and deserialization, and clock recovery. Each port has its own 10 – 210 MHz programmable reference clock.

The PCIe8g3 KU-10G supports PCI Express – PCIe, Gen3 x8 and has four 10G SFP/+ ports. Supported protocols are 1/10 GbE, OC3/12/48/192 (STM1/4/16/64), or OTU1/2/2e/2f. Each port links to the SERDES user-interface for serialization and deserialization, and clock recovery. Each port has its own 10 – 210 MHz programmable reference clock.