Engineering Design Team, Inc. (EDT)

The PMC DV C-Link is a Camera Link image capture interface that provides high-resolution digital image capture from video in the PMC form factor. It has one MDR-26 pin connector for a single base-mode camera. The board fits in any PMC slot.

The EDT PCI DV C-Link is a Camera Link frame grabber providing high resolution capture of digital video camera images. Two MDR 26 connectors support one medium, or up to two base-mode, cameras. The half height board fits in a PCI slot.

The EDT cPCI DV C-Link is a Camera Link frame grabber that provides high-resolution capture of CCD and CMOS video images. Two MDR 26 connectors support one medium, or up to two base-mode, cameras. The half height board fits in a CompactPCI slot. 3U and 6U versions are available.

The VisionLink F1 is a 1-lane PCIe framegrabber with one or two SDR26 connectors for up to two Camera Link cameras, base mode. The F1 operates in standard mode control (CC) lines. Camera control is by UART on board, and it has external triggering. The board has 1-, 4-, 8-, or 16-lane PCIe slots, and fits into half or full height back panels.

The EDT VisionLink F4 is a 4-lane PCIe frame-grabber with two SDR26 connectors for up to two base through full mode Camera Link cameras. Operates in standard mode control (CC) lines. Camera control is by UART on board, and it has external triggering. The board has 4-, 8-, or 16-lane PCIe slots, and fits into half or full height back panels.

EDT VisionLink CLS is a camera link that designed to facilitate development and testing of imaging systems, cameras, and software by using actual or generated images. Internal counters can be used as alternative source of image data.

The PMC DV FOX frame grabber by EDT provides high-resolution image capture for Camera Link cameras via fiber optic cable over long distances. One medium- or two base-mode cameras can be connected at distances up to 100 kilometers from the host computer, depending on your transceivers.

The VisionLink XF by Engineering Design Team supports Camera Link in base mode through extended full mode. This remote extender runs over fiberoptic cable. The distance between the host computer and camera can be tens to thousands of metres, depending on cabling and the transceivers.

Replace your standard base mode Camera Link cabling with fiberoptic with the VisionLink RCX, extending your range well beyond electrical cabling. With a similar form factor to a standard Camera Link connector, the VisionLink RCX supports data rates up to 255 MB/s and pixel clock rates of 20 – 85 MHz.

The VisionLink RCX is the latest generation of EDT extenders and supports base mode Camera Link over the complete 20 – 85 MHz camera pixel clock range. The VisionLink product is recommended for new projects. However, we will continue to supply the RCX C-Link product.

The PCIe8 CML-ECL is a PCI Express 8-lane interface that enables fast DMA and synchronous I/O to transfer CML and ECL data between an external device and a host computer. 8 bidirectional channels are supported; four CML and four ECL.

The EDT PCI CDa board provides one high-speed 16-bit parallel channel or an optional 16 synchronous serial channels between an external device and a PCI local bus computer (or optional 16-channel synchronous serial interface).

The EDT ECL / LVDS-E / RS-422-E is a mezzanine board that pairs with an EDT main board for PCI Express for high-speed data transfer. This “E-series” board options are ECL, LVDS or RS-422 inputs and outputs in groups of four, with an E1/T1 option.

The EDT PCIe4 CDa is a PCI Express 4-lane interface that enables fast DMA and synchronous I/O to transfer differential data between an external device and a host computer, LVDS or RS422. FPGA is Intel Arria II GX (EP2AGX45D) combining PCIe DMA at 700 Mbs with UI functionality at 150 Mbs I/O, which is via integrated FIFO buffers.

The EDT PCIe8g3 S5-40G supports PCI Express – PCIe, Gen3 - x8 and has one 40G QSFP+ and supports 1/10/40 GbE, OC3/12/48/192 (STM1/4/16/64), or OTU1/2/2e/2f. The ports link to the SERDES user-interface for serialization and deserialization, and clock recovery and its own 10 – 210 MHz programmable reference clock.

The EDT PCIe8g3 S5-10G supports PCI Express – PCIe, Gen3 - x8 and has four 10G SFP+ and 1 – 10 GbE or OC3/12/48/192 (STM1/4/16/64), or OTU1/2/2e/2f. The ports link to the SERDES user-interface for serialization and deserialization, and clock recovery and its own 10 – 210 MHz programmable reference clock.

The EDT PCIe8g3 A5-10G supports PCI Express – PCIe, Gen3 - x8 and has two 10G SFP+ and 1 – 10 GbE or OC3/12/48/192 (STM1/4/16/64), or OTU1/2/2e/2f. This low-profile board is available as a half-height or full-height backpanel. The port links to the SERDES user-interface for serialization and deserialization, and clock recovery and its own 1 – 808 MHz programmable reference clock.

EDT Bridge, Backpanel, and Time Boards attache to EDT main boards.

The EDT SNAP1 1U system captures real-time, raw bit data for storage and playback. OTU4 data of 128, 256, or 512 GB is saved on an internal solid state drive, or to external nonvolatile memory via USB or 1 GbE. 32 or 64 GB snapshot memory is available.

The EDT μWRAP 25G is a compact system with 12 to 24 TB of storage, and two optical interfaces for recording and playback. This is low SWaP (size, weight, and power) solution in a small, self-contained system. It operates with two real-time 12.5 Gbs data streams with framed data capture.

Bring your own M.2 NVMe solid state drives (SSD) and plug in to the EDT Mako carrier board to record up to 8 Terabytes of storage capacity. The board seats in a standard PCIe slot, and takes up to four ultra high speed NVMe RAID disk drives. 512 GB, 1 TB or 2 TB SSDs can be used, totaling 8 TB.

The EDT uWRAP VITA 49 is a compact, self-contained system for recording and playback of VITA 49 data streams. With 12 or 24 TB of data storage and one or two high speed optical interfaces, the uWRAP VITA 49 provides a reduced size, weight, and power (SWaP) VITA 49 record / playback solution.

The EDT WBX Recorder is a single channel RF digitizer and recording system with a 2.6 GHz input bandwidth and 12 TB of signal storage. The system has one RF input, a 10 MHz reference and 1 pps input or output, and a 10 GbE output port.

The TACWRAP VITA 49 is a compact, conduction cooled, self-contained system for recording and playback of VITA 49 data streams. With 8, 16 or 24 TB of hot-swappable data storage and one or two high speed optical interfaces, it provides a reduced size, weight, and power (SWaP) VITA 49 record / playback solution.

The Edgeblade SSA (Snapshot Storage Appliance) is the perfect solution for your data analysis and storage needs. Comparable in performance to the EDT SNAP1 and WSU1, the Edgeblade SSA is designed as a drop-in replacement for Engineering Design Team’s (EDT) original 10G record and playback solution, WRAP 10G, WRAP PACK, and WRAP10G. 

Engineering Design Team (EDT), a leader in high-speed I/O interfaces, brings the power of machine learning and AI (artificial intelligence) inference to the edge with edgepoint.ai. This highly configurable platform pairs EDT’s I/O expertise with a NVidia Jetson Xavier NX to get the intelligence you need, when and how you need it. 

Engineering Design Team’s (EDT) Microblade recorders are designed with low size, weight and power (SWAP) in mind, and offer high performance in a small footprint. Measuring just 23.5 x 14.5 cm (9.5 x 5.75 inches) and packed with up to 15TB of storage density per channel, these compact systems are built for applications at the edge or even in the lab.